| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000020N600XX |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 Sequoia) | ||
|
Radio Broadcast cannot be Received or Poor Reception |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK NAVIGATION RECEIVER ASSEMBLY |
(a) Check the radio's automatic station search function.
(1) Check the radio's automatic station search function by activating it.
OK:
The radio's automatic station search function works properly.
|
|
2. |
CHECK OPTIONAL COMPONENTS |
(a) Check optional components (sun-shade film, telephone antenna, etc.).
(1) Check if any optional components, such as a sunshade film or telephone antenna that may decrease reception capacity, are installed.
OK:
Optional components are installed.
NOTICE:
Do not remove any optional components installed by the customer without his or her consent.
|
|
3. |
CHECK NAVIGATION RECEIVER ASSEMBLY (ANTENNA) |
|
(a) Preparation for check (1) Remove the antenna plug from the navigation receiver assembly. |
(b) Check for noise
(1) Turn the ignition switch to ACC with the navigation receiver assembly connector connected.
(2) Turn the radio on and enter AM mode.
(3) Place a screwdriver, thin wire, or other metal object on the navigation receiver's antenna jack and check that noise can be heard from the speaker.
OK:
Noise occurs.
|
|
|